Markforged Holding Corporation (NYSE:MKFG) Q4 2023 Earnings Call Transcript

Markforged Holding Corporation (NYSE:MKFG) Q4 2023 Earnings Call Transcript March 7, 2024

Markforged Holding Corporation isn’t one of the 30 most popular stocks among hedge funds at the end of the third quarter (see the details here).

Operator: Greetings and welcome to the Markforged Fourth Quarter 2023 Earnings Conference Call. At this time, all participants are in a listen-only mode. A brief question-and-answer session will follow a formal presentation. [Operator Instructions] As a reminder, this conference is being recorded. It is now my pleasure to introduce your host, Austin Bohlig, Director of Investor Relations. Thank you, Austin. You may begin.

Austin Bohlig: Good afternoon. I’m Austin Bohlig, Director of Investor Relations of Markforged Holding Corporation. Welcome to our fourth quarter of 2023 results conference call. We will be discussing the results announced in our earnings press release issued after market close today. With me on the call is our; President and CEO, Shai Terem; and our CFO, Assaf Zipori. Before we get started, I’d like to remind everyone that management will be making statements during this call that include estimates and other forward-looking statements which are made pursuant to the Safe Harbor provisions of the Private Securities Litigation Reform Act of 1995. Any statements contained in this call that are not statements of historical facts should be deemed to be forward-looking statements.

These statements represent management’s views as of today, March 7th, 2024, and are subject to material risks and uncertainties that could cause actual results to differ materially. Markforged disclaims any intention or obligation, except as required by law, to update or revise forward-looking statements. Also, during the course of today’s call, we refer to certain non-GAAP financial measures. There’s a reconciliation scheduled showing the GAAP versus non-GAAP results currently available in our press release issued after market close today, which can also be found on our website at investors.markforged.com. I’ll now turn the call over to Shai Terem, President and CEO of Markforged.

Shai Terem: Thank you, Austin. And thank you, everyone for joining us on our Q4 2023 earnings call. We ended the year with a positive momentum as we continue to execute our strategy. While the challenging CapEx environment of 2023 delayed system sales were encouraged by 20% sequential revenue growth in the fourth quarter, which helped drive sales to the high end of our 2023 target range. Thanks to effective cost controls, we also exceeded our 2023 gross margin and operating cost targets. We are well positioned for growth as we drive the adoption of additive manufacturing on the factory floor to increase efficiency, reduce costs and improve supply chain resiliency. Revenue growth aided by the new FX10, PX100 and Digital Source, combined with the continued focus on expense control, we believe we remain on a clear path to profitability.

During Q4, we saw positive momentum with many customers across the globe. One example is our expanded relationship with Automation Alley and Project DIAMOnD through the sale of an additional 125 OnyxPro printers, augmenting the existing fleet of 300 printers Automation Alley originally acquired in 2021. This win is part of a strategic partnership between Project DIAMOnD and Digital Source, our on-demand platform for 3D printing, OEM certified parts. We believe this expansion validates our secure cloud-based software capabilities that include fleet management, quality control and part validation. We are excited about the partnership with Automation Alley and advancing our vision with Digital Source. As we enter 2024, manufacturers need to reduce costs and build more resilient, supply chains remain a tailwind, driving demand for the Digital Forge.

The opportunity to move maintenance, repair and operations or MRO, from physical to digital inventory and bring industrial production to the point of need provides a massive market opportunity. Our global customers increasingly recognize the Digital Forge as a powerful platform for achieving these goals. Danone, a global nutrition, essential diary and plant-based product leader, provides another great example. Factory Bierun is Danone’s leading production center in Europe, processing milk sourced from Polish farms. The products manufactured at this facility are distributed to both the domestic market and more than 20 other countries. The Bierun factory in Poland faced supply chain disruptions, spare parts availability challenges and equipment maintenance issues.

In response, Danone Dairy plant turned to the Digital Forge and X7 printers due to their reliability, ease-of-use and industrial-strength parts. In the first year, by their own estimates, Danone dairy plant reduced cost by 80% across 374 printed parts. As we look ahead into 2024, we expect the capital spending environment will continue to be challenging as a result of the current macroeconomic environment, including elevated interest rates. While our guidance factor in these challenges persisting through the year, we believe we are positioned for growth in the second half of 2024, driven by our new product introductions, robust fleet utilization and improving efficiencies in our go-to-market operations. Innovation for the factory floor drive Markforged forward.

At Formnext in November last year, we launched three important new products, FX10, Vega and Digital Source. We’re excited about this strong initial demand for the FX10 and we remain on schedule to begin shipping in the first half of this year. With these new products alongside the FX20, PX100 and the rest of our industrial printer lineup, we enter 2024 with the strongest product portfolio in the company’s history. These new products help position us for growth in 2024 and beyond. The health of our global printer network remain robust as customers saw even more factory floor applications using our metal and advanced composite solutions. Furthermore, we are pleased with the strong growth in subscription sales, which helped drive services revenues up 25% year-over-year in 2023.

We believe the strong utilization rates and the resulting recurring revenue streams will grow in 2024. Markforged remains laser-focused not just on growth, but also on margin expansion and achieving profitability. We are particularly encouraged by sequential improvement in non-GAAP gross margins, which exceeded 49% in the fourth quarter, coupled with improving operational and working capital efficiencies throughout 2024, we are confident we can navigate the challenging macroeconomic environment with continued prudent cash management and our strong balance sheet. We strongly believe that FX10, the FX20, the PX100 and Digital Source, along with the rest of our factory-proven industrial printers, meet critical industry needs to strengthen manufacturing resiliency and supply chains.

As global capital expenditure constraints loosen, we are well positioned to realize the substantial growth opportunities that our platform provides. Before turning the call over, I’m very pleased to announce that Assaf Zipori, the company Acting Chief Financial Officer since May 2023, has been named Chief Financial Officer. Assaf has been a key member of our executive team for over four years and has repeatedly demonstrated the business acumen and leadership to head our financial organization. I’m confident in his continued leadership to help us on our journey to profitable growth. With that, I now turn the call over to Assaf Zipori, our CFO, who will offer more details on our financial performance and guidance for the year.

Assaf Zipori: Thank you, Shai. And good evening, everyone. Since joining Markforged, I’ve been inspired by our fantastic team, the power of our technology, and our mission to bring industrial production to the point of need. I am grateful for this opportunity and I am confident in our team’s ability to drive success. With that said, I will now be covering our financial results for the fourth quarter and full year of 2023. Please note, that my comments reflect our non-GAAP results and outlook. For your reference, our earnings press release issued earlier this afternoon and posted to our Investor Relations website includes our GAAP to non-GAAP reconciliation to assist with my commentary. So let’s begin. Revenue for Q4 was $24.2 million, up 20% from Q3 2023 and down 19% from the fourth quarter of 2022.

Our revenue performance was still impacted by a challenging macroeconomic environment with high interest rates. The year-over-year decline in system sales also impacted consumable revenues that are tied to new hardware purchases. That said, we are pleased with the adoption rate of our subscription-based software and services, which predominantly drove a 33% growth year-over-year in the fourth quarter. Total revenue was $93.8 million, which is above the midpoint of our guidance, but down from $101 million in 2022. Gross margins for the quarter was 49.5%, representing a 2% margin expansion, up from 47.5% in the fourth quarter of 2022. This margin expansion was positively impacted by product mix and operational efficiencies. Gross margins for 2023 was 48.6%, which is above the high end of our guidance range compared to a gross margin of 50.8% in 2022.

A key goal for us in 2024 is to sustain this positive momentum, scaling up our business and enhancing operational efficiencies even further. Operating expenses were $24.9 million in the fourth quarter of 2023, down from $29.4 million in the fourth quarter of 2022. Operating expenses for the full year 2023 were $103.1 million, down from $114.3 million in 2022, representing an OpEx reduction of $11.2 million. This improvement is a result of our ongoing efforts to reduce operating expenses and optimize our cash utilization. Operating loss was $13 million for the fourth quarter of 2023, an improvement from $15.3 million in the fourth quarter of 2022. Our operating loss for the full year 2023 was $57.6 million, showing an improvement from a loss of $63 million in 2022.

In 2023, we took multiple steps to build operating leverage and right-size our cost structure. This effort is expected to decrease our operating expenses further to an annual run rate of between $92.5 million and $95 million in 2024. Net loss in the fourth quarter of ‘23 was $11.6 million, an improvement from a loss of $13.3 million in Q4 2024. Our net loss for the full year 2023 was $51.2 million, an improvement from $60.1 million in 2022. Fourth quarter loss per share was $0.06 based on our weighted average shares outstanding for the quarter of 198.4 million. Our loss per share for the full year ‘23 was $0.26 compared to a loss per share of $0.32 for the full year 2022, driven by improving operational and working capital efficiencies, our net cash used in operating activities in ‘23 decreased by $24.6 million or approximately 33% from 2022.

Our cash, cash equivalents and short-term investments were $116.9 million at the end of the year, down by $9.1 million from the last day of the third quarter of 2023. We expect our cash utilization to continue to improve in 2024 as a result of high revenue, modest gross margins, expansion, strong OpEx cost control and working capital efficiencies. Before moving on to our guidance, I want to underscore our dedication to striking a balance between our capacity for a successful innovation, market success and our commitment to maintaining a strong balance sheet. Now, moving on to our guidance. We anticipate fiscal year 2024 revenues to be within the range of $95 million to $105 million. While our guidance acknowledges the persistence of macroeconomic headwinds throughout the year, we see an opportunity for accelerated growth in the second half of the year.

Our outlook is underpinned by the introduction of new products and particularly the FX10. In line with seasonal industry trends, we expect to see the normal mid-teen sequential revenue percentage decline in the first quarter and expect revenue to grow modestly sequentially in Q2. And as I indicated previously, we are encouraged by our growth prospects in the second half of the year, driven by new products. We expect gross margins to be within the range of 48% to 50% as we continue to ramp up our new product lines. We also anticipate that the expense disciplines and cost structure realignment we undertook in 2023 will continue to make a positive impact in 2024. We expect non-GAAP operating loss in the range of $42.5 million to $47 million for the year.

Finally, we expect non-GAAP EPS results for the full year to be a loss in the range of $0.19 to $0.22 per share. That concludes our prepared remarks today. Please open up the call for questions.

See also 22 Countries Most Likely To Survive Climate Change and 20 Countries With The Best Justice System in the World.

Q&A Session

Operator: Thank you. We’ll now be conducting a question-and-answer session. [Operator Instructions] Thank you. Our first question is from Troy Jensen with Lake Street Capital Markets [sic – Cantor Fitzgerald]. Please proceed with your question.

Troy Jensen: Hey, thank you, it’s Cantor Fitzgerald. And I think I know you guys know that, but. Hey, first of all, congrats guys, on great results here in Q4. Assaf, you too on the CFO position, excited to be working with you guys.

Assaf Zipori: Thank you, Troy.

Troy Jensen: All right, Shai for you, I guess two things I want to hit, FX10, could you just remind us pricing difference between the X7 and the FX10 and timing of revenues again, please?

Shai Terem: Yes. So the FX10 is slightly more expensive than the X7. It’s somewhere mid-range between the X7 and the FX20 and we are still on track to ship it in the first half of this year and as such to start to see the revenue ramping up starting in the first half. I think it’s going to become more meaningful in the second half.

Troy Jensen: Okay. All right, perfect. I remember the launch at Formnext. It was pretty impressive. So good luck with that. But and then also Digital Source, I’d love to get an update. You mentioned Automation Alley and I think they’re using it. But any update also kind of timing on kind of revenue contribution that would be awesome.

Shai Terem: Sure. We’re actually very excited with the Digital Source. The engagement and excitement around this from potential customers is much bigger than we expected and we are starting to work with them on how to collaborate this platform into their solution, into their problems. But for this year, we will focus on adoption. We’re going to be focusing on scale. So I think this year we would not see material revenue contribution from the Digital Source. But the traction is much stronger than we expected before.

Troy Jensen: Can you remind me, just the revenue there’s going to be upfront system sales, right for people that are putting them out their partners, and then there’s going to be an ongoing kind of annuity stream? Are you still working out kind of all the kinks?

Shai Terem: So there’s a few revenue streams from the Digital Source. I think the first one is definitely through expansion, because our customers will sell the solution into their customers. So we see expansion of the adoption of our core solution. But in addition to it, we expect to see revenue from the utilization of the platform itself and that will come in later years.

Troy Jensen: Okay, awesome. I think I’m good. I’ll see the floor and good luck, gentlemen.

Shai Terem: Thank you, Troy.

Operator: Thank you. Our next question is from Greg Palm with Craig-Hallum. Please proceed with your question.

Danny Eggerichs: Yeah, thanks. This is Danny Eggerichs on for Greg today. Wanted to hit on Automation Alley, I think. I looked back and that original sale was around $8 million for those 300 printers. So I guess is it fair to say that this sale was like around a $3 million to $4 million contribution? And was this one of them that you mentioned last quarter that you kind of expected to hit that got pushed out?

Shai Terem: So actually not as we stated, this is 125 units of OnyxPro, so it’s smaller than what you suggested. And other big deals we are working on are still in play. So I think we are happy they are still in play. But Automation Alley is a great strategic partnership for us. We are looking into serious adoption in the supply chain that’s supporting automotive. We see serious partnership here into the adoption of the Digital Source. So it’s a very important partnership for us and it’s going in the right direction with continuous kind of adoption across hundreds of users by now.

Assaf Zipori: Hey, Danny, it’s Assaf. I’d like to chime in for a minute, and if you’re asking if we have dependency in terms of the sequential growth that you’re seeing on this deal, then the answer is no. We are very pleased with the growth rate sequentially that we’ve seen from Q3 to Q4, irrespective of this deal.

Danny Eggerichs: Okay, that’s perfect. I guess maybe just hitting on the broader demand environment, obviously still challenging, and maybe expecting some recovery in the second half, especially driven by kind of the new products. But just wondering over the last couple of months, kind of what you’ve seen with sales cycles, whether you’ve seen them contract at all or they’re kind of staying steady, just overall kind of what you’re seeing?

Shai Terem: Yeah, I think, as you can see, between Q4 and Q3, there’s definitely an improvement. And I’m going to be cautiously optimistic here that this will continue. But it’s still a challenging environment, as you stated, and as other industrial companies are being challenged with. But we are razor sharp focused on the factory floor, and there is millions of factory floors out there that we can go and have a great solution for them that can help them reduce cost and bid resiliency. And I think in times like this, when everyone is challenged, we have a path in there. So it’s still tough, but I think it’s getting slightly better.

Danny Eggerichs: All right, I’ll leave it there. Thanks.

Shai Terem: Thank you.

Operator: Thank you. Our next question is from Brian Drab with William Blair. Please proceed with your question.

Tyler Hutin: Hey, this is Tyler Hutin on for Brian. Thanks for taking my questions. I’ll keep it quick since we have some follow-ups after this. I’m just wondering if the burn through of the high cost inventory that’s associated with FX20, is that going to help with margin expansion for the full year? And where do you see the timing with that? Thank you.